Products Products
Hot Deals
2017 - 10 - 21
Product Description:WTN6 series sound chip is 4-bit controller. At present there are three kinds of chip: WTN6010, WTN6020, WTN6040, WTN6090 (voice length is 10s,20s,40s,...
2016 - 11 - 14
Product DescriptionWT588D voice ic chip is multitime programmable music chip, 4 packages:  DIP18, SSOP20, SSOP28, LQFP32.It support silence insertion. One address bit can insert 10...
2016 - 12 - 15
WTR050 voice recording chip is a multifunctional voice record & playback chip, specially designed for recording voice, long recording distance, good sound quality, can directly drive...
2016 - 11 - 14
1. Brief IntroductionSmartSound PIR motion activated sound player adopts human body induction technology. When it detects people passing, it can automatically play voice.Download voice ...
WTK6900 series

WTK6900M01 Voice Command LED Light Module

Feature:

1. Turn on power. Please use 5V power supply. (when power on, please don’t touch the key)

2. After power on, into identification state, there are two ways to control LED light: voice commands and touching key.

3. Touching switch(touch key)

Two modes: short press, long press. Following is the effect of the two key-press modes.


适用范围:
上市时间: 2017 - 12 - 07
产品描述:
产品说明:
Product Description:WTK6900M01 voice recognition module is mainly applied to table lamp. It can respond to voice commands to control the lamp switch, adjust the brightness of the lamp and delay the time to turn off lamp. It can also control the lamp switch and realize electrodeless dimming by touching switch.Circuit diagram: How to use?Using steps:1. Turn on power. Please use 5V power supply. (when power on, please don’t touch the key)2. After power on, into identification state, there are two ways to control LED light: voice commands and touching key.3. Touching switch(touch key)Two modes: short press, long press. Following is the effect of the two key-press modes. Note: key is high-level triggering4.Voice commandsVoice command on and off : say...
  • Details

Product Description:

WTK6900M01 voice recognition module is mainly applied to table lamp. It can respond to voice commands to control the lamp switch, adjust the brightness of the lamp and delay the time to turn off lamp. It can also control the lamp switch and realize electrodeless dimming by touching switch.

WTK6900M01 Voice Command LED Light Module

Circuit diagram:

WTK6900M01 Voice Command LED Light Module 

How to use?

Using steps:

1. Turn on power. Please use 5V power supply. (when power on, please don’t touch the key)

2. After power on, into identification state, there are two ways to control LED light: voice commands and touching key.

3. Touching switch(touch key)

Two modes: short press, long press. Following is the effect of the two key-press modes.

WTK6900M01 Voice Command LED Light Module 

Note: key is high-level triggering

4.Voice commands

Voice command on and off : say “Aladdin lamp” ( can be customized), identified in the first time, light on, next time identified, light off.

Voice command brightness and darkness: too bright or too dark to increase/ reduce LED luminance.

Voice command of turn off five minute later: five minuter later, light off automatically.

WTK6900M01 Voice Command LED Light Module 

Note:

1.The voice recognition of the module is speaker-independent recognition.

2. Voice commands must be set before the delivery. Users cannot set voice commands by themselves.

Notes

1. When power on, hand cannot touch the key, otherwise, touching key will not work normally.

2. Environment: quiet environment, echoless.

3. Speak slowly, not too fast, not too slow, cannot pause too long. For example, when you say ”Aladdin lamp”, you cannot say “Aladdin” then stop 1 second to say ”lamp”. There should be no pause among the words.

WTK6900M01 Voice Command LED Light Module

WTK6900M01 Voice Command LED Light Module

 


发布时间: 2016 - 11 - 14
WTK6900B02 V2.03-P1 Module Features:☆USB interface, can replace sound on PC.☆Available to connect Flash, micro SD card, SD card.(Flash used at present)☆Compatible System: WINXP, WIN7, WIN8 system WTK6900B02 V2.03-P2 Module Features:★Within half meters, recognition accuracy above 90%★Speaker-independent recognition★Control output through voice command.★Play the specified voice through MCU serial port control.★Three output modes: serial port output, IO output, speaker output.★PWM output can directly drive 0.5W/8Ω or 1W/8Ω speaker.★Can add SPI flash to increase the storage capacity.★Only with Flash, can replace words, store and play sound.★Can store multiple groups of words, but only one phrase is available at the same time.★Voice recognition distance up to ...
发布时间: 2016 - 11 - 14
Electric Parameter:☆Voice recognition rate up to 90% within half a meter.☆Control output through voice command.☆Play the specified voice through MCU serial communication control.☆Three output modes: serial output, IO output, speaker output.☆PWM output can directly drive 0.5W/8Ω or 1W/8Ω speaker.☆Have differential amplifier circuit.☆Voice recognition distance up to 2~3m in a quiet environment.☆Can add SPI flash to increase the storage capacity.☆Can store many groups of words.☆Speaker-independent recognition.☆Support 32 languages, such as Chinese, English, Cantonese, Japanese etc.Voice recognition chip can be sold separately, SSOP24 package. At present, we can sell both module and chip. Following is a comparison. Whether need to add Flash: Application ...
发布时间: 2016 - 11 - 14
Product Description:WTK6900M01 voice recognition module is mainly applied to table lamp. It can respond to voice commands to control the lamp switch, adjust the brightness of the lamp and delay the time to turn off lamp. It can also control the lamp switch and realize electrodeless dimming by touching switch.Circuit diagram: How to use?Using steps:1. Turn on power. Please use 5V power supply. (when power on, please don’t touch the key)2. After power on, into identification state, there are two ways to control LED light: voice commands and touching key.3. Touching switch(touch key)Two modes: short press, long press. Following is the effect of the two key-press modes. Note: key is high-level triggering4.Voice commandsVoice command on and off : say...
Hot Products / Related Products More
2016 - 11 - 14
WTK6900B02 V2.03-P1 Module Features:☆USB interface, can replace sound on PC.☆Available to connect Flash, micro SD card, SD card.(Flash used at present)☆Compatible System: WINXP, WIN7, WIN8 system WTK6900B02 V2.03-P2 Module Features:★Within half meters, recognition accuracy above 90%★Speaker-independent recognition★Control output through voice command.★Play the specified vo...
2016 - 11 - 14
Electric Parameter:☆Voice recognition rate up to 90% within half a meter.☆Control output through voice command.☆Play the specified voice through MCU serial communication control.☆Three output modes: serial output, IO output, speaker output.☆PWM output can directly drive 0.5W/8Ω or 1W/8Ω speaker.☆Have differential amplifier circuit.☆Voice recognition distance up to 2~3m in a quiet en...
Top
Copyright ©2005 - 2017 Shenzhen Waytronic Electronics Co., Ltd.
犀牛云提供企业云服务